The two ends of the traction rope are respectively connected to the car and the counterweight, and are wound on the traction sheave and the guide wheel. The traction motor drives the traction sheave to rotate after the speed of the reducer. The traction force generated by the friction between the traction rope and the traction sheave , To achieve the lifting movement of the car and the counterweight, and achieve the purpose of transportation.
Modern elevators are mainly composed of traction machine (winch), guide rail, counterweight, safety device (such as speed limiter, safety gear and buffer, etc.), signal control system, car and hall door, etc. These parts are respectively installed in the shaft and engine room of the building. Generally, steel wire rope friction transmission is adopted. The wire rope goes around the traction wheel, and the two ends are respectively connected to the car and the counterweight. The motor drives the traction wheel to make the car lift. Elevators are required to be safe and reliable, high conveying efficiency, accurate leveling, and comfortable riding. The basic parameters of the elevator mainly include the rated load, the number of passengers, the rated speed, the size of the car's outline, and the type of hoistway.
Simple method of use (there are solutions below for emergencies):
Manned elevators are all intelligent and automated equipment controlled by microcomputers and do not require specialized personnel to operate and drive. Ordinary passengers only need to follow the procedures below to ride and operate the elevator.
1. At the entrance of the elevator on the elevator floor, press the up or down arrow button according to your own upward or downward needs. As long as the light on the button is on, it means that your call has been recorded. Just wait for the elevator to arrive.
2. After the elevator arrives and opens the door, first let the people in the car get out of the elevator, and then the callers enter the elevator car. After entering the car, press the corresponding number button on the control panel in the car according to the floor you need to reach. Similarly, as long as the button light is on, it means that your floor selection has been recorded; at this time, you don't need to perform any other operations, just wait for the elevator to reach your destination floor and stop.
3. When the elevator reaches your destination floor, the door will automatically open. At this time, stepping out of the elevator in order will end the process of taking the elevator.